Once you use drive belts, chains or friction drives you will look for a need for re-tensioning. Over time, vibration and friction can lead to slipping or unnecessary wear on your machinery’s electric motors or belts. The easiest method to account for this is to make sure your electric motors could be adjusted to pay for these problems by using electric engine slide bases. These enable you to accurately adjust the mounted electrical motor’s lateral position to the millimeter.
Motor Slide Foundation: This model demonstrates the use of a time saving technique called a good Component. A GOOD Component enables you to associate or “package together” other necessary components and features when placing a part in an assembly. The linked parts and features will end up being automatically placed together with the intelligent component by selecting a couple of reference faces. This particular example is used to quickly place a motor body with the associated mounting holes and hardware.
This model also has mate reference included which is another way to be more efficient when assembly modeling. It will automatically add one or more mates without having to select multiple mate entities and the type of mate. A Design Table is utilized to create four sample configurations that can be quickly modified to include more frame sizes. Download this document to understand about becoming more efficient when employed in assemblies.
Motor slide base made of steel
Steel Motor slide bottom is a straightforward alternative to the common clamping rails.
The motor is directly attached on the mounted motor slide vase and the belt drive is stretched on the basic level of the slide bottom. The installation is less time-eating and the establishing is easier.
The “Mono Plate“ version contains an assembly board which can’t be adjusted to between your motor feet.
With the “Duo Plate“ version, the assembly table is divided and only 1 side is led with the adjusting screw (tensioning screw). The plates could be moved independently that allows a certain variation with the electric motor feet distance.
The top quality galvanized surface or the cathodic dip painting (KTL) guarantee longevity with both versions and a simple use even under critical conditions. In addition they are incredibly torsion-resistant due to particular workmanship of the steel profiles.
Because of the varied slot design you can reach a particular variability to attach upon different motors with the „Mono Plate“ version as well.
As the “Mono Plate” version is preferred because it is more steady, as long as the exact distance between the motor feet is known.
Another advantage is definitely that the slide bases are easy to handle and light in weight.
Possible applications for these products include pumps, fans, compressors, conveyors, springtime loaded or vibration isolating mechanisms and much more.
NEMA Frame 445T Electric motor Slide Base
Double Adjusting
Adjusting Bolt is 3/4″
Motor Installation Bolts are 3/4″
Typically used on 150 HP Motors operating at 1200 or 1800 RPM.
Weight: 70 lbs
Product sizes: 32″x27″x6″
pdblowers PN 54140 (modified 54140.P)

Modified base designed for enhanced strength and durability
After using adjustable engine bases for several years on a huge selection of blower packages, pdblowers has developed several upgrades that make the motor bases far more durable and simple to use. Beginning with the typical 445T motor bottom, our fabrication team makes the following modifications: Motor slide base
Welded Corners – The created corners of the bare slide bases are welded together to add durability and power to the overall base
Pushing Bolts – In two opposing corners, nuts are welded to the base body and fitted with 6″ zinc-plated metal bolts. These pushing bolts are accustomed to help placement the motor and adapt the alignment without needing to put drive on the adjusting screws which can otherwise very easily become stripped.
Durable Paint Finish – Following the modifications are produced, the bottom receives a primer coat of Sherwin-Williams KEM KROMIK, a rust inhibiting, corrosion resistant phenolic alkyd resin primer, followed by a finish coat of Sherwin-Williams SHER-KEM® high gloss metal finishing enamel.
These altered bases are held in stock for make use of on all pdblowers blower deals and can be purchased individually.
Universal motor slide bases can be utilized to mount NEMA regular electric powered motors. Fabricated from metal and covered with primer for tough, lasting reliability, these motor slide bases simplify the adjustment, alignment, and positioning of electric motors. Ideal for fine engine positioning, tightening of belts, and alignment applications.

Product Features
Bases are provided with washers
Bases are painted with an oven-baked primer for better contact of customer’s paint
All “D” bolts (engine installation bolts) are welded into position to avoid spinning and “dropping” from slots
All “D” bolts are set to the precise foot pattern of the engine to aid in easier motor installation
Exact drop-in alternative to all main make slide bases
Solitary adjusting screws for frames 56-145T
Double adjusting screws for frames 182T-505T
The main reason for a slide base is to permit the customer to adapt the motor’s position to insure proper tension on the belting apparatus.
Motor slide base
The slide base is a one piece steel installation apparatus (with floor installation holes and adjustable motor mounting bolts). When installing, the base ought to be safely anchored as close to its operating placement as possible. The motor should then be positioned on the slide base and the belting program configured. Position the motor therefore the proper tension comes to the belts and tighten the engine in place.

Slide bases can be supplied for horizontal frames 140T through 449T, and so are specific to each frame. Frames 140T – 365T possess one adjustable screw and 404T – 449T have two adjustable screws.
56 – 505U Frame Size in Stock;
56 – 145T Frames are Single-Adjusting Screw Type;
182T – 505U Frames are Double-Adjusting Screw Type
Bases are Provided with Washers
Primed with Oven-Baked Primer for Easy Painting (Color: Black)
All “D” Bolts (or Motor Mounting Bolts) are Welded into Position to Prevent Spinning and Dropping from the Slots
All “D” Bolts (or Motor Installation Bolts) are Set to the Exact Foot Pattern of the Motor to assist in Easier Motor Installation
Field Installed Adjustable Motor Slide Base Heavy gauge steel installation bases simplify installing motors and make the tensioning, maintenance and replacement of belts a simple efficient task. Fabricated from sheet or metal plate, after that primed and completed in a gray rust and corrosion resistant oven-baked complete.
bottom is meant to match a size 56 body (56C, 56, 56J) and comes with washers and an oven-baked primer that is ready for clients paint. All “D” bolts (electric motor installation bolts) are welded into placement to avoid spinning and “dropping” from slot machine games, plus all “D” bolts are fixed to the specific foot pattern of the motor for easier set up. This motor bottom is a direct drop in alternative to various other brands of slide bases.