Single and double reduction planetary equipment drives to be utilized with electric, hydraulic, air motors or mechanical power input from high swiftness, low torque sources to provide decreased speeds at increased torques. The input side has standard SAE pads for motor mounting. Available in the three output configurations proven below. Many units can be furnished with an integral parking brake.
Solitary reduction drives are limited to 3500 RPM input; double reduction drives to 5000 RPM. Units with integral parking input velocity is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque rankings to about 1/3 to 1/2 the values shown. Products provide 95% power transmission efficiency.
Wheel Drive
Input side has standard SAE pads and splined input. Output part has hub for installation automobile wheel. Free wheel can be done by using the springtime disconnect to disengage the drive shaft. The disengage feature can be standard on all wheel drives.
Shaft Output
Input side regular SAE pads with splined input. Output side options include: Keyed round, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is standard SAE pads with splined input. Output side includes a flanged spindle for coupling to the load.
Swing Drives
Ever-Power model 6 emerges with or without integral parking brakes. The “SW” Power Wheel provides extra-large tapered roller bearings, a ductile iron hub and heat Plastic Gear Rack treated ring equipment to minimize backlash growth caused by wear. The exterior bearing nut provides the greatest in shaft retention and shaft power. Output could be a spindle shaft 
or numerous sizes of essential pinion gears.