The EP Series Helical Bevel Reducer provides unmatched performance, durability, and style flexibility. This unit offers torque capacities up to 20,000 Nm (14,750 ft lbs).
The cat4CAD software allows simple interactive product selection of the complete gearbox and gear-engine system. Cat4CAD facilitates you in choosing and configuring these products, gives you the chance to print out intensive technical data bedding, and generates complete 2D drawings and 3D models for direct download.
11 sizes
Insight power capacities from 0.16 to 120 HP
Gear ratios from 5:1 to 8900:1
Torque capacities to 20,000 Nm
Inverter duty class F insulated motor windings
Course 12 Helical and Spiral Bevel Gears: Provides higher efficiencies and greater torques in smaller sizes.
Multiple Input Options: Essential gear motors, ” or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Choices: Hollow bores and shrink disks for shaft mounting, inch and metric output shafts, mounting pilots and flanges offer an array of design solutions.
UNIBLOCK Housing: For maximum rigidity, universal installation on five sides or via a torque arm.
Worldwide Engine: Multiple leads and windings for worldwide multi volt/Hz requirements in addition modular design to accept brakes, encoders or forced cooling.
High efficiency motor design available
Innovative self-locking, self-aligning taper shaft motor connection
Gearbox supplied factory filled up with synthetic oil
Corrosion and shock resistant cast iron housing
High efficiency helical-bevel gears. 98% per stage
Normally closed breather with multiple locations (Optional OtN2000)
Double lip seals upon heat treated, plunge floor shafts
Shaft mounting options include tapered bushings designs
This is a comprehensive offering of energy-efficient, right angle helical bevel enclosed gearing. It really is obtainable as gearmotors and a variety of reducers with torque capacities up to 119,000 inch pounds. Housing designs include footed, encounter and flanged configurations. Gearmotors are available in three phase high efficiency designs through 50 HP and single phase to 5 HP. We provide a variety of input and result shaft options. Additionally, you will find fixed and variable quickness motors and range of ratios obtainable in this product offering.
Features
Accommodates input power from ΒΌ Hp to 75Hp
Torque rankings up to 119,489 in-lbs
Reduction ratios up to 7,500:1
Helical – bevel – helical gear train offers cost effective high and low speed solutions
Up to 94% efficient
Four input options available for all units
Two output flange choices – B5 and B14
Multiple output shaft interfaces
Essential dimensions interchangeable with main competitors
Modifications / Accessories
Integral Gearmotor
Clamp Collar C-Face Input
Solid Shaft Input
3-Piece Coupled C-Face Input
CEMA Screw Conveyor Adapter
EZ Kleen Washdown Package
XT Output Seals
Backstop
Heavy Duty Output Bearings
Inch or Metric Dimensions
Common Applications
Troughing Belt Conveyors
Slider Bed Conveyors
Mixer Drives
Screw Conveyors
Bucket Elevators
General Industrial Machinery
Common Industries
Aggregate and Cement
Air Handling
Chemical, Oil, and Gas
Food, Beverage, and Pharmaceutical
Paper and Forest
Unit and Baggage Handling
Water and Wastewater
As per the developing and varying needs of customers, you can expect a wide range of Helical Bevel Gear Reducers. The technological content material of our products permits an extraordinary functionality/lifespan ratio. The highly versatile Helical Bevel Gear Reducers we provide are successfully used in a multitude of commercial and civil applications. These are B-Series units that offer excellent value for money and output torque/weight ratio, especially due to the fact they need very limited servicing. Besides these, our products can be found in cast iron (sizes 063 to 163) or aluminium (sizes A42 to A73) casing.
Features:
Sizes: 060-080-100-125-140-150-160
Available versions: B-fitted for engine coupling, IB with input shaft, CB with small motor, PB-fitted for engine coupling with flexible joint
Casing with feet FC, flange SC and common UC
Switch on to 90 kW
Gears hardened and tempered with shaved or ground profile
Gearing with 3 reduction stages
Gleason spiral bevel gear pairs with run-in helical bevel gear reducer profile, mounted as second decrease stage for an increased resistance
Reduction ratios between 5, 71 and 187, 24
Torque max 13.000 Nm and admissible radial loads max 80.000 N
High-strength casings optimized with FEM evaluation and input and output flanges of grey cast-iron G200 to ensure best level performances and high reliability
Load capacity calculated and verified according to ISO 6336 and AGMA 2001
Painted with RAL 5010 blue epoxy-polyester powder
Accessories: torque arm, output flange, output 
shaft, shrink disk, backstop device, protection cover package, viton oil seals, reinforced result, assemble/disassemble kit
Series EP right position helical bevel equipment motors offer ratios from 8:1 to 160:1 in three phases or up to 10000:1 in five phases. Motors are available up to 90kW and output torque capability up to 12,300 Nm.
The series EP helical bevel gear motor is designed with integral cast feet for base or end mounting and can be offered with single or dual extended output shafts.
Models are also available because shaft mounted or with output flanges and are available for installation horizontally or vertically. The models can also be provided with a bolt on torque reaction bracket and all variants can be found possibly motorised or with an input shaft assembly.
Adding to the brand new range of Ever-Power helical equipment motors the product takes advantage of our many years of accumulated design knowledge together with the use of top quality materials and components. The outcome is a series of speed reducing geared motors offering high load holding capacities, increased efficiency, quiet running and reliability.
Features of Helical Bevel Gear Motor
Standard motor connection
Ability to fit double oil seals, on insight and output shaft since required.
All systems are dimensionally interchangeable with various other major manufacturers.
Units are produced and assembled from a family of modular kits for distributor friendliness minimizing inventory and maximizing availability.
Motorized units could be installed with a backstop module and reducer Models can be installed with a backstop and fan.
Applications:
-Conveyors, Agitators, Elevators, Cranes, Crushers
-Helical Bevel gear motors are found in industries such as chemical substances, pharma, packaging, food processing, plastic-type material and automation etc.
Key Features:
Sizes: A40-A50-A70
Offered versions: EP – fitted for electric motor coupling, IEP – with input shaft, CEP – with compact motor
Cases with ft, flange or universal
Power up to 4,8 Kw
Gears with shaved or ground profile
Gearing with 2 and 3 reduction stages
Hypoid bevel gears for size A40 and A50, gleason bevel gear pairs for size A70, all with run-in profile
Reduction ratios between 7,62 and 442,76
Torque max 450 Nm and admissible radial loads max 5.500 N on hollow shaft and 10.000 N on solid shaft
Cases in die-cast aluminium alloy
Exceptional mechanical strength while being and particularly lightweight
Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88
Painted with RAL 5010 blue epoxy-polyester powder in in accordance to DIN 1843
Accessories: torque arm, output flange, output shaft.
Generallntroduction of HK series:
Gear Reducer
The EP series gear units, are novel transmission gadget and made up of Y series motor, helical gear,Arc gear and worm gear. The gears are made of high wear-resisting alloy components, specifically and finely processed.
Advantages:
1: Helical-bevel gear two-stage reducer
2: Compact structure, high efficiency
3: Quenched 20CrMnTi for gears
4: CE, ISO9001.
5: Small design, small volume, nice appearance ,and strong capacity to be overloaded.
6: Precise division and wide selection for transmission ratio.
7: The performance is up to because high since 96% with low energy consumption, strong adaptability and is with the capacity of functioning continually in corrosive or damp environment.
8: All- purpose make use of, convenient and low-cost maintenance.
9: New seal gadget, strong adaptability.
10: Varied range of motor combinations, mouting positions and struture projects.
