The EP Greenhouse geared motor is a concise and lightweight reduction geared motor with an integrated limit switch system that is suitable for assembly of a locally available electric motor. The gear reducer is used in manually-controlled or climate-controlled ventilation and display systems in greenhouses. The quick and easy-to-install EP gear motor is certainly rainproof and windproof. The gear motor includes a high protection course (IP65) and can be used in an ambient temperature of 0-60 °C.
The low-noise gear driver for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmitting means that the drive shaft is certainly locked when the decrease gearbox isn’t running. The fully sealed reduction gearbox has an growth chamber with a diaphragm to keep carefully the gear essential oil at a minimal pressure under all circumstances, even at high temps. Thanks to the use of an growth chamber, the gear reducer could be installed in any position. There are no limitations, since there is no dependence on a bleed plug. The sealed reduction gear reducer keeps the apparatus essential oil of the gearbox in optimum condition for its entire operating lifetime. The reducer is suitable for discontinuous use, working course s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction geared motor comes with an FT85 motor assembly flange, to which the right IEC standard motor can easily be installed (EN 50347).
The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed in an integrated chamber and is enclosed by an impact-resistant plastic material cover. The limit change system is obtainable and easy to adjust. The limit switch system’s maximum switching range can be 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gear motor has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gear driver for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of app of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, maximum activation time 25 mins.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching selection of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).